Stereo Speaker Test
Play a tone in the left or right channel only and confirm your speakers or headphones are wired the right way round.
Stereo only works if the left channel reaches your left ear, and the failure is surprisingly common: headphones worn backwards, a swapped cable, a TV or amplifier wired in reverse, a Bluetooth quirk. Music rarely exposes it — a mix sounds plausible either way round — but one tone panned hard to a single side cannot hide. This test generates a plain 440 Hz sine in the browser and sends it through a stereo panner at −1 (left only), 0 (both) or +1 (right only), so what you hear is a direct report on your channel wiring, not a recording that could itself be mislabelled.
Play a tone in the left channel only, the right channel only, or both, and confirm each side of your headphones or speakers answers on its own.
If the “left” tone arrives in your right ear, your headphones are on backwards or the channels are swapped somewhere in the chain — more common than a broken driver. Mono devices (a single smart speaker, some laptops) play both channels together and cannot fail or pass this test.
Quick answers
How do I test whether my left and right channels are correct?
Play a tone panned fully left, then fully right. Here a 440 Hz sine is panned at −1 for left-only and +1 for right-only; each tone should be audible in one ear only, matching its label.
If left arrives on the right, suspect backwards headphones or a channel-swapping cable before faulty hardware. Mono devices sum both channels and cannot take this test.
What pan values mean left, center and right?
In the Web Audio stereo panner, −1 is left only, 0 is equal in both channels, and +1 is right only.
This test uses exactly those three values, with a three-second auto-stop so a forgotten tone never drones on.
How to use
- Put your headphones on (or sit between your speakers) and set a modest volume.
- Press Left: the tone should sound in your left ear only. Press Right: right ear only.
- Press Center to hear it equally in both, and Stop at any time — each tone also stops itself after three seconds.
About this tool
Two honest boundaries. A mono device — one smart speaker, a single laptop speaker that sums both channels — plays every test identically, so it can neither pass nor fail; the test only means something on genuinely two-channel output. And browsers without the Web Audio API, or without a stereo panner node, get a plain message (or an unpanned fall-back) rather than a silent wrong answer. Everything runs locally; no audio is recorded or sent anywhere — the “test” is your own ears, which is the correct instrument for the question.
Frequently asked questions
Why does the left tone play in my right ear?
Almost always one of three things: the headphones are on backwards (check for the L/R marks — with earbuds especially, this is the everyday cause), a cable or adapter in the chain swaps the channels, or a sound setting somewhere mirrors the output. Work down that list before suspecting the speakers themselves; a broken driver usually sounds distorted or silent, not neatly swapped.
What tone does the test use and how loud is it?
A 440 Hz sine wave — concert A — at a deliberately modest gain (0.12), stopping on its own after three seconds. 440 Hz sits in the middle of the hearing range where both ears and almost all speakers reproduce it clearly, and a sine has no harmonics to leak clues about which side it came from.
Why do all three buttons sound the same on my device?
Because the device is mono: it sums left and right into one channel, so a panned tone has nowhere to pan to. Single smart speakers and many small laptops behave this way. The test needs two distinct channels — headphones, earbuds or a stereo pair — to say anything at all.
Does the test record or upload anything?
No. The tone is synthesised in your browser with the Web Audio API and played through your own output. Nothing is recorded, and there is no microphone involvement at any point — that is a different tool (the microphone test) with its own permissions.
First time embedding? Read the step-by-step guide →
More free tools
Typing Speed Test
How fast can you type? Measure your WPM and accuracy in one minute or less.
Click Speed Test
Take the 5-second CPS test: click as fast as you can and get your clicks per second.
Keyboard Tester
Press any key and watch it light up — check every key on your keyboard works.
Microphone Test
Check your microphone works — see your voice level live and record a short playback.
Webcam Test
Preview your camera before the call — and snap a test photo to check the picture quality.
Dead Pixel Test
Fill your screen with five solid colours, one at a time, to spot dead and stuck pixels.