🔒 100% private — runs in your browser, nothing is uploaded

Fabric Yardage Calculator

How much fabric to buy for a quilt top, tablecloth, curtain or blanket — cuts, length and yardage.

Fabric is sold by length off a bolt of fixed width, which makes “how much do I buy?” a packing problem rather than an area problem. A 40 × 60 in project cannot come out of a single width of 44 in fabric unless the width fits — and when it does not, you buy whole extra cuts and seam them side by side. This calculator does that arithmetic honestly: it adds your seam allowance to both dimensions first, works out how many cuts of the fabric width cover the project width, then multiplies the cuts by the length each one needs.

Built for simple rectangular projects — a quilt top, tablecloth, curtain panel or blanket — with the cuts running along the length of the bolt. Patterned fabrics that need the motif matched across seams need extra length, which this calculator does not model. Working with fabric weight instead? The fabric GSM converter covers grams per square metre and ounces per square yard.

Share this exact result — the link carries these inputs, nothing is stored.

Quick answers

How many yards of fabric do I need for a 40 × 60 inch project?

On 44 in fabric with a 0.5 in seam allowance: 1.75 yd to buy (61 in of length, 1.6944 yd exactly, rounded up to the next eighth).

The allowance makes the project 41 × 61 in. One cut of 44 in-wide fabric covers the 41 in width, and that cut runs 61 in long. If the same project needs 5% shrinkage allowance, the length grows to 64.05 in and the buy figure becomes 1.875 yd.

How is fabric yardage calculated?

Add the seam allowance to both project dimensions, divide the width by the usable fabric width and round up to whole cuts, then multiply the cuts by the length per cut and convert inches to yards (÷ 36).

A 90 × 60 in project with a 0.5 in allowance needs 91 in across; on 44 in fabric that is 3 cuts. Each cut runs 61 in, so the total is 183 in = 5.0833 yd, and you buy 5.125 yd. Shrinkage, when entered, lengthens every cut before the total is taken.

How to use

  1. Pick your unit system: inches and yards, or centimetres and metres.
  2. Enter the finished project width and length, and the usable width of your fabric (selvedge to selvedge, minus any unusable edge).
  3. Set the seam allowance per side (0.5 in is the usual quilting allowance) and a shrinkage percentage if the fabric will be washed after sewing.
  4. Read the yardage to buy, rounded up to the next eighth of a yard, with the cut-by-cut breakdown underneath.

About this tool

The numbers behave the way the cutting table does. A 40 × 60 in project on 44 in fabric with a 0.5 in allowance needs 1 cut, 61 in of length — 1.6944 yd exactly, so you buy 1.75 yd. Widen the project to 90 × 60 in and the width no longer fits once: 3 cuts, 183 in, 5.0833 yd, buy 5.125 yd. Add 5% shrinkage to the first project and the length grows to 64.05 in, 1.7792 yd, buy 1.875 yd. Yardage to buy is always rounded up to the next eighth of a yard, the smallest increment most fabric counters will cut.

The limits are worth stating plainly. This is for simple rectangular projects — a quilt top, tablecloth, curtain panel, blanket — with cuts running along the length of the bolt. It does not model pattern matching: a fabric with a motif that has to line up across seams needs extra length per cut, and directional prints or nap can force cuts to run one way only. When in doubt, buy the extra eighth; fabric from a second dye lot rarely matches.

Frequently asked questions

How much fabric do I need for a 40 × 60 inch project?

On 44 in-wide fabric with a 0.5 in seam allowance and no shrinkage: 1 cut, 61 in of length, which is 1.6944 yd — buy 1.75 yd, rounded up to the next eighth. With 5% shrinkage allowed, the length becomes 64.05 in (1.7792 yd) and you buy 1.875 yd.

How does the calculator work out the cuts?

It adds the seam allowance to both sides of the project (so 40 in wide becomes 41 in), then divides by the usable fabric width and rounds up: 41 ÷ 44 is 1 cut for a narrow project, while a 90 in project needs 91 in across, and 91 ÷ 44 rounds up to 3 cuts. Each cut is as long as the project length plus allowance — 61 in in these examples — so 3 cuts take 183 in, 5.0833 yd, and you buy 5.125 yd.

Why is the yardage to buy higher than the exact yardage?

Fabric counters cut in standard increments, and an exact figure leaves nothing for a slightly crooked cut edge or a mis-measure. The buy figure rounds the exact yardage up to the next eighth of a yard (0.125 yd), which is the smallest step most shops will sell.

Should I allow for shrinkage?

If the fabric will be washed after sewing and you are not pre-washing it, yes — unwashed quilting cotton commonly shrinks around 2–5%. Enter the percentage and the calculator lengthens every cut by that amount before totalling. Pre-washing the fabric first is the other fix, and then 0% is the honest entry.

Does this work for patterned fabric?

Only as a minimum. The calculation assumes plain fabric where cuts can sit anywhere along the length. A pattern that must match across seams, or a one-way print, needs extra length per cut for matching — buy more than the figure here and treat it as a floor, not a target.

📦 Embed this tool on your site

<iframe src="https://verystep.com/embed/fabric-yardage-calculator/" title="Fabric Yardage Calculator" width="100%" height="520" loading="lazy" style="border:0"></iframe>

Free to use. The embed shows a small "Powered by Verystep" link.

First time embedding? Read the step-by-step guide →

More free tools