🔒 100% private — runs in your browser, nothing is uploaded

Cylinder Calculator

Volume, total surface area and lateral area of a right circular cylinder.

A cylinder is a circle extruded through a height, so its volume is simply base area times height: V = πr²h. A tank of radius 2 and height 5 holds 20π ≈ 62.832 cubic units. The surface area splits into the parts real jobs separate: the side wall (lateral area 2πrh — what a label or a wrap covers) and the two end discs. Counted together, the closed surface is 2πr(r + h) ≈ 87.965 for the same tank.

Radius, not diameter: if you measured across the top of the tank, halve it first. Surface area counts both circular ends; lateral area is the side wall only.

Quick answers

How do you calculate the volume of a cylinder?

V = πr²h — base area times height. Radius 2, height 5 gives 20π ≈ 62.832 cubic units.

In centimetres, divide the cubic centimetres by 1,000 to get litres.

How do you calculate the surface area of a cylinder?

A = 2πr(r + h) for a closed cylinder — the side plus both ends. Radius 2, height 5 gives about 87.965 square units.

Side only (a label or wrap) is the lateral area 2πrh, about 62.832 for the same cylinder.

How to use

  1. Enter the radius r of the circular end — halve a diameter measurement first.
  2. Enter the height h, end to end.
  3. Read the volume πr²h as the headline result.
  4. Pick the area that matches the job: total surface for a closed tank, lateral for the side wall or a label.

About this tool

Unit discipline matters more than the formula. Volume in cubic centimetres converts to litres by dividing by 1,000, so a modest tank of radius 20 cm and height 50 cm holds π × 400 × 50 ≈ 62,832 cm³ ≈ 62.8 litres. And the radius-versus-diameter trap is expensive here: entering a diameter as the radius quadruples the computed volume, which is why the note above repeats it. For an open-top tank, subtract one end disc (πr²) from the surface area; for a pipe, use the annulus page for the wall cross-section instead.

Frequently asked questions

What is the volume of a cylinder with radius 2 and height 5?

V = πr²h = π × 4 × 5 = 20π ≈ 62.832 cubic units. In centimetres that is 62,832 cm³, or about 62.8 litres.

What is the difference between surface area and lateral area?

Lateral area is the curved side only: 2πrh. Total surface area adds the two circular ends: 2πr(r + h). A label covers the lateral area; painting a closed tank covers the total.

How do I calculate a cylinder from its diameter?

Halve the diameter to get the radius first. A 4-wide, 5-tall tank has r = 2 and the 62.832 volume above. Entering 4 as the radius would claim four times the true volume.

How much does an open-top tank hold versus a closed one?

The capacity is the same πr²h either way — the lid does not change the volume. Only surface area changes: an open tank has one fewer end disc, πr² less material.

📦 Embed this tool on your site

<iframe src="https://verystep.com/embed/cylinder-calculator/" title="Cylinder Calculator" width="100%" height="520" loading="lazy" style="border:0"></iframe>

Free to use. The embed shows a small "Powered by Verystep" link.

First time embedding? Read the step-by-step guide →

More free tools