🔒 100% private — runs in your browser, nothing is uploaded

Cone Calculator

Volume, slant height and total surface area of a right circular cone.

A cone holds exactly one third of the cylinder that shares its base and height, which is the fact its volume formula encodes: V = (1/3)πr²h. For radius 3 and height 4 the volume is 12π ≈ 37.699 cubic units, against 113.1 for the matching cylinder. The sloping side introduces a second length, the slant height l = √(r² + h²) — a clean 5 for the 3-4 cone — and the surface area is built from it: the lateral (side) area πrl plus the base disc πr², totalling πr(r + l) ≈ 75.398 for the same cone.

Height here is the vertical (perpendicular) height, not the slant. Slant height — the length up the sloping side — is calculated for you.

Quick answers

How do you calculate the volume of a cone?

V = (1/3)πr²h — one third of base area times height. Radius 3, height 4: (1/3)π × 9 × 4 ≈ 37.699 cubic units.

Use the vertical height for volume. The slant height belongs to the surface-area formula instead.

How do you calculate the surface area of a cone?

A = πr(r + l), where l = √(r² + h²) is the slant height. For r = 3, h = 4: l = 5 and A = π × 3 × 8 ≈ 75.398.

Drop the base term for an open cone: lateral area alone is πrl.

How to use

  1. Enter the base radius r — centre of the circular base to its edge.
  2. Enter the vertical height h — base to tip, straight up, not along the slope.
  3. Read the volume (1/3)πr²h as the headline result.
  4. Use the surface area (base included) for closed cones, or the lateral area for open ones like funnels and hats.

About this tool

Keep the two heights separate, because mixing them is the classic cone error: vertical height goes into the volume, slant height goes into the surface area. Real cones — paper cups, funnels, conical piles of gravel, party hats, roof caps — are usually measured by their slant (you can run a tape up the side) or by vertical height (you can drop a plumb line), rarely both, which is why this page takes the vertical height and derives the slant by Pythagoras. For a pile of material, remember the angle of repose fixes the height-to-radius ratio, so one measurement often implies the other.

Frequently asked questions

What is the volume of a cone with radius 3 and height 4?

V = (1/3)πr²h = (1/3) × π × 9 × 4 = 12π ≈ 37.699 cubic units — one third of the 113.097 the same-base cylinder would hold.

How do I find the slant height of a cone?

By Pythagoras on the radius and the vertical height: l = √(r² + h²). Radius 3 and height 4 give the familiar 3-4-5 triangle, so l = 5.

Does the surface area include the base?

The headline surface area does: πr(r + l) counts the side and the circular base. The lateral area πrl is also shown for open cones — funnels, hats and cups — that have no base to cover.

Why is a cone exactly one third of a cylinder?

It is a calculus result with a simple intuition: horizontal slices of a cone shrink linearly from base to tip, and the average of that shrinking works out to one third of the full cylinder. It holds for any cone shape with the same base area and height, not just circular ones.

📦 Embed this tool on your site

<iframe src="https://verystep.com/embed/cone-calculator/" title="Cone Calculator" width="100%" height="520" loading="lazy" style="border:0"></iframe>

Free to use. The embed shows a small "Powered by Verystep" link.

First time embedding? Read the step-by-step guide →

More free tools