🔒 100% private — runs in your browser, nothing is uploaded

Circular Segment Area Calculator

Area, chord and arc of a circular segment from the circle radius and the segment height.

A circular segment is the slice cut off a circle by a straight chord — the shape of a round window with a flat sill, a tank’s fill cross-section, or an arch top. It is described here by the radius R and the segment height h (the sagitta). The area formula, R²·arccos((R − h)/R) − (R − h)·√(2Rh − h²), is really “sector minus triangle”: the pie-slice out to the chord, less the triangle inside it. For R = 5 and h = 2 that gives ≈ 11.182, with a chord of 8 and an arc of about 9.273.

The height h is the sagitta — the distance from the chord to the far edge of the arc, measured through the middle. It must be no more than the diameter.

Quick answers

How do you find the area of a circular segment?

From radius R and height h: A = R²·arccos((R − h)/R) − (R − h)·√(2Rh − h²). For R = 5, h = 2 the area is about 11.182.

The formula is the sector minus its triangle. Check: at h = R it returns exactly half the circle’s area.

How long is the chord of a segment?

Chord = 2√(2Rh − h²). For R = 5 and h = 2 that is 2√16 = 8.

Chord and sagitta together determine the radius too: R = (h² + (chord/2)²) / (2h), handy when the radius is the unknown.

How to use

  1. Enter the radius R of the full circle the segment was cut from.
  2. Enter the segment height h — chord to arc, through the middle (the sagitta).
  3. Read the segment area as the headline result.
  4. Use the chord length for the straight span and the arc length for material that follows the curve.

About this tool

Two checkpoints help catch bad inputs. When h equals R the segment is exactly a semicircle, so R = 5, h = 5 must return half the circle’s area, 12.5π ≈ 39.27 — and this formula does. When h is small the segment is a shallow cap and its area is roughly two-thirds of chord × height, a useful mental estimate for shallow arches and part-filled pipes. Heights beyond the diameter are impossible and are refused.

Frequently asked questions

What is a circular segment?

The region between a chord and the arc it cuts off. It is smaller than a semicircle when the height is less than the radius, exactly a semicircle when height equals radius, and larger than a semicircle beyond that.

What is the sagitta?

The height of the segment — the perpendicular distance from the middle of the chord to the arc. Surveyors and arch builders use it because it is easy to measure with a straightedge and a ruler. For R = 5 and a chord of 8, the sagitta is 2.

How is segment area calculated?

A = R²·arccos((R − h)/R) − (R − h)·√(2Rh − h²). It is the sector area minus the triangular part. R = 5, h = 2 gives about 11.182 square units.

Can the segment be more than half the circle?

Yes, whenever h is greater than R, up to the full circle at h = 2R. The same formula covers it, because arccos((R − h)/R) then exceeds a right angle. The calculator accepts heights up to the diameter.

📦 Embed this tool on your site

<iframe src="https://verystep.com/embed/circular-segment-area-calculator/" title="Circular Segment Area Calculator" width="100%" height="520" loading="lazy" style="border:0"></iframe>

Free to use. The embed shows a small "Powered by Verystep" link.

First time embedding? Read the step-by-step guide →

More free tools