Annulus Area Calculator
Area, circumferences and width of a ring (annulus) from its outer and inner radii.
An annulus is what remains when a smaller circle is cut out of a larger one, and its area follows directly from that picture: the area of the outer disc minus the area of the hole, πR² − πr², which factors neatly into π(R − r)(R + r). With an outer radius of 5 and an inner radius of 3 the area is π × (25 − 9) = 16π ≈ 50.265 — noticeably more than the hole alone (9π), because area grows with the square of the radius, so material near the rim counts for much more than material near the centre.
The annulus is the flat ring between two concentric circles — the shape of a washer, a pipe cross-section or a running track. The inner radius must be smaller than the outer radius.
Quick answers
How do you find the area of a ring?
Subtract the hole from the disc: A = π(R² − r²). Outer radius 5 and inner radius 3 give π × 16 ≈ 50.265 square units.
Equivalently π(R − r)(R + r) — ring width times the sum of the radii, times π.
What is the width of an annulus?
Simply R − r, the outer radius minus the inner radius. For R = 5 and r = 3 the ring is 2 units wide.
Width alone does not fix the area: a 2-wide ring around a large hole holds far more area than the same width around a small one.
How to use
- Enter the outer radius R — from the centre to the outside edge of the ring.
- Enter the inner radius r — from the centre to the edge of the hole. It must be smaller than R.
- Read the ring area π(R² − r²) as the headline result.
- Use the two circumferences for edging or seal lengths, and the width (R − r) for material thickness.
About this tool
The shape turns up wherever something is a ring in cross-section: metal washers and gaskets, pipe and tube walls (where the annulus area times length gives the volume of metal), tree rings, athletics tracks and the usable area of a circular driveway around a planter. The two circumferences matter in their own right — the outer one is the length of edging or sealant around the outside, the inner one the length around the hole.
Frequently asked questions
What is the formula for the area of an annulus?
A = π(R² − r²), where R is the outer radius and R − r logic aside, r is the inner radius. For R = 5 and r = 3 that is π × 16 ≈ 50.265 square units.
I know the diameters, not the radii. Can I still use this?
Yes — halve each diameter first. A ring with a 10-unit outside diameter and a 6-unit hole has R = 5 and r = 3, giving the 50.265 area above.
What if the inner radius equals the outer radius?
Then there is no ring left — the area is zero, and if the inner radius is larger the shape is impossible. The calculator asks for R larger than r instead of returning a negative area.
How do I get the volume of a pipe from this?
Multiply the annulus area of the cross-section by the pipe length. That gives the volume of the wall material; use the inner circle area (πr²) times length instead if you want the volume the pipe can carry.
First time embedding? Read the step-by-step guide →
More free tools
Percentage Calculator
Work out percentages, increases and discounts in one click.
Age Calculator
Find your exact age in years, months and days.
BMI Calculator
Check your Body Mass Index in seconds.
Tip Calculator
Split the bill and work out the tip in seconds.
Discount Calculator
See the sale price and how much you save, instantly.
Scientific Calculator
Full scientific calculator: trig, logs, powers, factorial. Free, private, runs in your browser.