Paint Calculator
Estimate paint for a room from its dimensions, less doors and windows, for the number of coats you plan — in gallons and litres.
Paint quantity is wall area with the holes taken out. The walls of a rectangular room are two times (length plus width) times the height; subtract about 21 square feet per standard door and 15 per standard window, multiply by the number of coats, and divide by the coverage the paint actually achieves. Worked through for the room this page starts with — 12 by 10 feet with 8-foot ceilings, one door, two windows, two coats — the walls are 352 square feet gross, 301 after deductions, 602 across both coats, which at the standard 350 ft² per gallon is 1.72 gallons (6.51 litres). A ceiling adds its length-times-width area on top: the same room with the ceiling painted needs 2.41 gallons.
Coverage is an estimate, not a promise: 350 ft² per gallon is the figure most interior paints print on the can, but rough, porous or unprimed walls drink more (250–300 is common) and dark-over-light colour changes can need an extra coat. Doors are deducted at a standard 21 ft² and windows at 15 ft² — measure yours and adjust the counts if they are much bigger or smaller. When in doubt, round up: a spare quart beats a second trip.
Quick answers
How much paint do I need for a room?
Walls are 2 × (length + width) × height; subtract 21 ft² per door and 15 ft² per window, multiply by coats, divide by coverage (usually 350 ft²/gal). A 12 × 10 ft room with 8 ft ceilings, 1 door, 2 windows and 2 coats needs 1.72 US gallons (6.51 litres).
Painting the ceiling too? Add length × width of ceiling area — the same room then needs 2.41 gallons.
How accurate is a paint coverage estimate?
It is an estimate with one soft number in it: coverage. The area arithmetic is exact, but real coverage runs 250–350 ft² per gallon depending on surface and colour change. Lower the coverage setting for rough or unprimed walls and the estimate adjusts.
When the estimate lands just under a can size, buy the extra can — returns of unopened paint are easy, mid-job shortages are not.
How to use
- Measure the room: length, width and ceiling height, in feet.
- Enter how many doors and windows to deduct (a standard door counts as 21 ft², a standard window 15 ft²), and whether the ceiling is being painted too.
- Set the number of coats and, if your paint can says something different, its coverage — 350 ft² per gallon is the usual printed figure.
- Read the paint needed in US gallons and litres, and buy whole cans that add up to at least that much.
About this tool
The honest uncertainty is the coverage figure. The 350 ft² per gallon on the can assumes a smooth, primed, like-coloured surface; bare plaster, brick, heavy texture or a strong colour change can pull real coverage down to 250–300, and primer is a separate product with its own coverage. That is why the coverage field is editable and labelled an estimate: if your walls are rough or thirsty, lower it and let the estimate grow, rather than discovering the shortfall with one wall left. Extra paint also has a use — labelled leftovers are what make future touch-ups invisible.
Frequently asked questions
How much area does one gallon of paint cover?
About 350 square feet per coat is the figure most interior paints print, and it is the default here. Real coverage depends on the surface: smooth primed drywall can beat it, while unprimed, porous or heavily textured walls may only reach 250–300. If the number on your can differs, use the can — that is why the field is editable.
Why deduct 21 ft² for a door and 15 for a window?
Those are the standard allowances for typical residential openings: a 3 ft by 7 ft door is 21 square feet, and a common 3 ft by 5 ft window is 15. They are approximations — a wall of patio glass or a double door deserves a tape measure instead. Enter fractional counts if you want to split the difference.
Do I really need two coats?
For most repaint jobs, yes — one coat rarely hides evenly, and paint manufacturers base their coverage and colour promises on two. One coat can be enough for a same-colour refresh in good condition; three may be needed for a dramatic colour change or over stains that were not primed. Set the coat count to what you will actually do, because it multiplies the whole estimate.
Does the calculator include primer?
No — primer is a different product with different coverage, and not every job needs it. New drywall, bare wood, stains and big colour changes usually do. If you are priming, run the same room through again with the primer’s coverage figure from its can to get that quantity separately.
First time embedding? Read the step-by-step guide →
More free tools
Concrete Calculator
Work out the volume of a slab, footing or round post and how many 60 lb or 80 lb pre-mix bags it takes.
Stair Calculator
Design a staircase from the total rise: riser count and height, total run, slope and 2R+T, checked line by line against IRC and IBC limits.
Color Converter (HEX ↔ RGB)
Convert HEX to RGB and back, with live preview.
Percentage Calculator
Work out percentages, increases and discounts in one click.
Age Calculator
Find your exact age in years, months and days.
BMI Calculator
Check your Body Mass Index in seconds.