Concrete Calculator
Work out the volume of a slab, footing or round post and how many 60 lb or 80 lb pre-mix bags it takes.
Concrete is unforgiving about arithmetic: too little and you stop mid-pour with a cold joint, too much and you pay to dispose of the surplus. The geometry is simple — length times width times thickness for a slab or footing, pi times radius squared times height for a round post — but the unit juggling is where mistakes happen, because thickness is measured in inches, volume is sold in cubic yards, and bags are counted in cubic feet. This page does the whole chain at once. The reference pour: a 10 ft by 10 ft slab, 4 inches thick, is 33.333 cubic feet — 0.944 cubic metres, or 1.235 cubic yards.
Bag yields are the standard figures printed on the bags: one 80 lb bag makes about 0.60 cubic feet of concrete and one 60 lb bag about 0.45 cubic feet. Volumes are exact geometry; real pours vary with the subgrade, formwork and how level the base is, which is why the 5% waste option exists. This is an estimate for ordering, not an engineering calculation — structural work belongs to your local code and, where required, a licensed engineer.
Quick answers
How do I calculate how much concrete I need?
Multiply the pour’s volume: length × width × thickness for a slab (10 ft × 10 ft × 4 in = 33.333 ft³), or π × radius² × height for a round post. That slab is 0.944 m³ / 1.235 yd³, which is 56 × 80 lb bags or 75 × 60 lb bags at the standard yields of 0.60 and 0.45 ft³ per bag.
Add about 5% for waste and uneven ground if you want the order, not just the geometry — the same slab then needs 59 or 78 bags.
How much concrete does an 80 lb bag make?
About 0.60 cubic feet — the yield printed on standard pre-mix bags. A 60 lb bag makes about 0.45 cubic feet. So a cubic yard (27 ft³) is roughly 45 big bags or 60 small ones.
That is why bag math gets impractical fast: anything over about a third of a yard is usually cheaper and far less work as ready-mix.
How to use
- Pick the shape: slab or footing (a rectangular pour) or cylinder (a round post hole or pier).
- For a slab or footing, enter length and width in feet and thickness in inches; for a cylinder, enter diameter and height in feet.
- Set how many identical pours you are making, and tick the 5% waste box if the ground is uneven or the forms are rough.
- Read the volume three ways (ft³, m³, yd³) and the bag counts, and order ready-mix by the cubic yard if the job is big.
About this tool
Bag counts use the yields printed on the bags themselves: an 80 lb bag of pre-mix makes about 0.60 cubic feet of finished concrete and a 60 lb bag about 0.45 cubic feet. On those figures the 10 by 10 slab needs 56 of the 80 lb bags or 75 of the 60 lb bags — which is also the moment most people switch to a ready-mix truck, since a cubic yard is roughly 45 of the big bags. Tick the waste option and the same slab asks for 59 or 78 bags: five percent sounds small until you are three bags short at the far corner. These are ordering estimates, not structural design — rebar, footings under load and anything holding up a building follow your local code and, where required, an engineer.
Frequently asked questions
How many 80 lb bags of concrete are in a cubic yard?
About 45. One 80 lb bag yields roughly 0.60 cubic feet and a cubic yard is 27 cubic feet, so 27 divided by 0.60 is 45 bags. For 60 lb bags at 0.45 cubic feet each, the same yard is 60 bags. Those yields are the standard figures manufacturers print on the bag.
How thick should a concrete slab be?
Four inches is the common default for patios, walkways and shed bases, and it is the thickness this page starts from. Driveways usually go thicker (5–6 inches) and footings follow the frost depth and load rules in your local code — the calculator takes whatever thickness you give it, but choosing the thickness for structural work is a code question, not an arithmetic one.
Should I really add 5% for waste?
On a perfectly level, well-formed base, maybe not. On real ground — a base that dips, forms that bow, a wheelbarrow spill — five percent is the difference between finishing the pour and mixing one emergency bag at a time. Ready-mix suppliers suggest 5–10% for the same reason. The option is off by default here so the plain geometry is visible first.
Does this work for round post holes?
Yes — choose the cylinder shape and enter the hole diameter and depth in feet. A 2 ft diameter hole, 4 ft deep, is 12.566 cubic feet: 21 of the 80 lb bags or 28 of the 60 lb bags, before any waste allowance.
First time embedding? Read the step-by-step guide →
More free tools
Paint Calculator
Estimate paint for a room from its dimensions, less doors and windows, for the number of coats you plan — in gallons and litres.
Stair Calculator
Design a staircase from the total rise: riser count and height, total run, slope and 2R+T, checked line by line against IRC and IBC limits.
CBM Calculator
Volumetric (dimensional) weight and CBM for your cartons — cubic meters, cubic feet and gross weight.
Unit Converter
Convert length, weight and temperature instantly.
Percentage Calculator
Work out percentages, increases and discounts in one click.
Age Calculator
Find your exact age in years, months and days.