Color Blindness Simulator
See your image as a colour-blind viewer might — seven vision types, side by side.
Roughly one man in twelve and one woman in two hundred sees colour differently, and most design tools never show you what that does to your work. A line chart whose red and green series cross, a map where two regions differ only by hue, a form that marks errors in red alone — all of these can look perfectly clear to the person who made them and genuinely ambiguous to a large slice of the people who have to use them. Opening the image here and flipping through the vision types is the quickest sanity check there is.
Original
Simulated
Your image never leaves this device — it is read and re-drawn in this page only, and nothing is uploaded or saved. Very large photos are drawn at a maximum of 1600px on the long edge so the simulation stays fast; the download is that same 1600px-capped size. Checking a chart or interface? Our colour palette tool helps you pick the replacement colours.
Quick answers
How can I check whether my chart works for colour-blind readers?
Open the chart image here and view it under protanopia and deuteranopia, the two most common types. If any series, regions or labels become hard to tell apart, they need a label, a pattern or a brightness difference as well as colour.
Download the simulated PNG to show the problem in a design review — the side-by-side pair makes the point faster than describing it.
What is the difference between protanopia and deuteranopia?
Protanopia is the absence of red cones and deuteranopia the absence of green cones. Both scramble the red-green axis, but not identically: pure red becomes (145, 142, 0) under protanopia and (159, 179, 0) under deuteranopia.
Deuteranopia is the more common of the two. Checking both matters because a colour pair that survives one can still collapse under the other.
Can this tool tell me whether I am colour blind?
No. It simulates how an image may look to someone else; it does not test your vision, and it cannot diagnose anything. The disclaimer on this page states that plainly.
If you suspect a colour-vision deficiency, the proper route is a standard screening test (such as Ishihara plates) administered properly, followed by an eye-care professional.
How to use
- Open an image file — a chart, a screenshot, a map, a photo, anything you want to check.
- Pick a vision type: the three -opia types remove one colour channel entirely, the -anomaly types weaken it, and achromatopsia removes colour altogether.
- Compare the original and the simulation side by side — if two series, labels or buttons merge into one colour, they will merge for that viewer too.
- Download the simulated version as a PNG to share with your team or attach to a design review.
About this tool
The simulation recolours every pixel with a standard colour-vision matrix for the type you pick. The -opia matrices model a missing cone type: protanopia (no red), deuteranopia (no green) and tritanopia (no blue). The -anomaly types, where the cone is weakened rather than missing, are modelled halfway between normal vision and the matching -opia matrix. Achromatopsia uses the standard luminance weights (0.299 red, 0.587 green, 0.114 blue), so a pure red at 255, 0, 0 comes out as grey 76, 76, 76. Red and green confusion is by far the most common pattern, so if you check only two types, make them protanopia and deuteranopia — pure red under protanopia comes out 145, 142, 0, a muddy olive rather than anything red-looking.
What you see is an approximation, not a portrait of any one person’s eyes. Two people with the same diagnosis can perceive noticeably differently, severity varies, and screens vary. Use the result the way designers actually use it: to catch pairs of colours that collapse into each other, to check that nothing is carried by colour alone, and to decide where a label, pattern or brightness difference needs to do the work instead. Your image is processed entirely in this page and never leaves your device.
Frequently asked questions
What does pure red look like under each main type?
The matrices give exact answers you can check: red (255, 0, 0) becomes (145, 142, 0) under protanopia, (159, 179, 0) under deuteranopia, and (76, 76, 76) — plain grey — under achromatopsia. White (255, 255, 255) stays white under every type, including deuteranopia.
What is the difference between -opia and -anomaly?
An -opia type means one cone type is absent; an -anomaly means it is present but weakened. This tool models each -anomaly as a 50% blend between normal vision and the matching -opia matrix, so red (255, 0, 0) under protanomaly comes out as (200, 71, 0) — redder than its protanopia result, but still shifted.
Which types should I check first?
Protanopia and deuteranopia. Red-green deficiency is the most common form of colour-vision difference by a wide margin, and it is the one that breaks red/green charts, status lights and error highlighting. Tritan (blue) types are rare, and achromatopsia rarer still.
What does blue become under tritanopia?
Blue (0, 0, 255) becomes (0, 145, 134) — the blue channel folds into a teal-green. That is why blue-versus-green distinctions, not just red-versus-green, deserve a look when you check maps and diagrams.
Is my image uploaded?
No. The file is read by your browser on this device, redrawn pixel by pixel in this page, and the PNG you download is generated locally as well. Nothing is sent or stored.
First time embedding? Read the step-by-step guide →
More free tools
Color Palette Generator
Random harmonious color palettes, one click.
Base64 Encode / Decode
Encode text to Base64 or decode it back.
Color Converter (HEX ↔ RGB)
Convert HEX to RGB and back, with live preview.
Unit Converter
Convert length, weight and temperature instantly.
Currency Converter
Daily ECB reference rates for 26 currencies — updated once per business day.
World Clock & Time Converter
Current time in major cities, plus converter.