Seller Procurement Workbench
The whole sourcing chain on one page: carton → container & pallet → totals → landed cost → the price your margin needs, in shared in-page state.
Every tool in this site’s seller cluster answers one question well — how many cartons fit, what the MPF is, what the landed cost comes to, what price a margin needs. A real purchase, though, is one chain of those questions, and re-typing the same carton size, unit count and goods value into five pages is where figures quietly drift apart. This workbench is the chain on a single page: step 1 works out the container and pallet counts from the carton, step 2 totals the units and the goods value, step 3 charges freight, duty and the CBP fees on that value, and step 4 turns the per-unit landed cost into the selling price your target margin requires. Change any figure and every step below it reworks instantly, because all four steps share one set of numbers held in this page’s memory.
One page, the whole purchase: carton → container and pallet → totals → landed cost → the price your margin needs. Every step shares the figures above it, and everything lives in this page’s memory only — no account, no storage, nothing in the URL. Each step links to the standalone tool that goes deeper on it.
Step 1 — Carton, container & pallet
Deeper: the 20ft Container Carton Calculator shows every orientation, and the Ti-Hi Pallet Calculator adds custom pallets and a pallet weight limit.
Step 2 — Totals, sampling & the packing list
Step 3 — Landed cost
Deeper: the US Landed Cost Calculator compares up to four scenarios and prints an itemised breakdown sheet; the MPF Calculator isolates the one fee.
Step 4 — The price your margin needs
Deeper: the Pricing & Profit Calculator also checks the profit at a price you are testing.
Carry this chain to a standalone tool
Export downloads one small JSON file holding the whole chain. Import it on any chain tool — or import a file exported there — and the fields fill in. The file travels only where you carry it: nothing is uploaded, stored, or written into any URL.
Estimate only — not customs, tax, financial or legal advice. The duty rate and the percentage fee rate are your own entries; the MPF/HMF schedule is CBP’s FY2027 schedule, last verified November 2026, from the seller cluster’s single shared source.
Data passport — where the figures on this page come from
| Data source | Container basis as on the 20ft Container Carton Calculator (carrier 20GP specification); MPF/HMF from the cluster's single source — CBP FY2027 schedule (CBP Dec. 26-14, Federal Register 91 FR 48398), HMF 0.125% under 19 CFR 24.24; sampling strip from ANSI/ASQ Z1.4 / ISO 2859-1 Table I |
|---|---|
| Effective | October 1, 2026 (MPF schedule) |
| Last verified | November 2026 |
| Watch owner | Seller-cluster data watch — re-checked against CBP's new fiscal-year schedule every October 1 and whenever CBP publishes a change; container and sampling data on the annual re-check |
Quick answers
How do you work out a full import purchase — cartons, landed cost and selling price — in one pass?
Start from the carton: its size gives the cartons per 20ft container (best of six orientations inside 589.8 × 235.2 × 239.3 cm, checked against the 28,180 kg payload) and the Ti × Hi pallet pattern. Cartons × units per carton × unit cost gives the goods value; freight, duty, MPF and (on ocean cargo) HMF on that value give the landed cost and the per-unit cost; the required price is then per-unit costs ÷ (1 − fee rate − target margin). Worked end to end below: 225 cartons, 5,400 units, $13,500 of goods become a $16,476.14 landed cost, $3.05 per unit, and a $4.69 required price at 15% fees and a 20% margin.
The point of doing it on one page is that the steps share state: the goods value the fees are charged on is the same number the carton step produced, not a re-typed copy of it. Re-typing is where sourcing spreadsheets usually break — a carton count updated in one place and not another, a goods value rounded differently on the cost page than on the pricing page.
How many cartons of 60 × 40 × 40 cm fit in a 20ft container, and what is the full chain on that carton?
225 cartons — a 65.1% load rate; at 12 kg each that is 2,700 kg, well under the 28,180 kg payload, so space binds. On a EUR pallet with a 180 cm stack limit the pattern is Ti 4 × Hi 4 = 16 cartons per pallet, so the load needs 15 pallets. At 24 units per carton and $2.50 per unit the load is 5,400 units worth $13,500; with $1,800 freight, 7.5% duty, $100 insurance and ocean transport, the landed cost is $16,476.14 ($3.05 per unit), and at 15% fees a 20% target margin needs a $4.69 selling price.
Each of those numbers is the default case on this page, so the live workbench shows exactly this chain — change the carton and watch all four steps move. The container step tries all six orientations of the carton and keeps the best; mixed carton sizes can beat the single-size grid by using the leftover strips, which is why the page calls itself an estimate, not a loading plan.
Can figures move between this workbench and the standalone seller tools?
Yes — by a file you carry, never by a link. The Export button downloads one small JSON file (the shared verystep-seller-chain format) holding the chain’s figures; the Import data button on the container, pallet, AQL, MPF, landed-cost and pricing pages reads that same file and fills their fields in. Lengths travel in centimetres and weights in kilograms, and each page converts to its own display units on import. Business data never travels in a URL, because URLs end up in browser history, shared links and server logs.
The same rule shapes the whole seller cluster: inputs live in page memory only, nothing is written to localStorage or IndexedDB, and the only persistent copies of your figures are files you chose to download. Close the page and the chain is gone — that is the feature, not a limitation.
How to use
- Step 1: enter the packed carton’s outside dimensions, gross weight, units per carton and unit purchase cost, pick the pallet and the maximum stack height — the container count and the Ti × Hi pattern update as you type.
- Step 2: read the totals — total units, goods value — and the sampling strip (code letter and sample size for the lot at the inspection level you pick; the AQL Calculator holds the accept / reject numbers). Print or download the packing list from this step’s figures.
- Step 3: add international freight, your duty rate, insurance and any other charges, choose the entry type and whether the cargo arrives by ocean — the landed cost itemises itself, with the per-unit figure.
- Step 4: add any other per-unit costs and a fixed fee per order, enter your own combined percentage fee rate and the target gross margin — the required selling price appears with its fee and profit split.
- To continue on a specialist page, export the chain file here and import it there; to bring figures back, export there and import here. Nothing is saved on the site either way.
About this tool
The standalone pages are not replaced — they go deeper (the full AQL accept / reject table, the MPF informal modes, landed-cost scenario comparison, the two-direction pricing check). This page is the fast pass and the meeting point: its export file is the same seller-chain JSON the standalone chain tools import, so a chain started here can be finished on a specialist page, and a figure worked out there can be brought back here. Links to each standalone tool sit under the step it deepens.
The privacy shape is deliberate and strict. Everything you type is business data — prices, goods values, margins — so it never enters the page’s URL (neither the query string nor the part after #), is never written to browser storage, and is never sent anywhere. State lives in page memory only and is gone when you close the page. The only files that exist are the ones you explicitly make: the chain export, the packing-list CSV, and anything you print.
Homogeneity note: this page overlaps the container, pallet, landed-cost and pricing calculators by design — it is their aggregate entry point, not a sixth calculator with new maths. Every figure it shows is computed with the same formulas and the same fee schedule as the standalone pages (the MPF constants come from one shared source for the whole cluster), so the workbench and the specialist pages cannot disagree; where they differ is depth, not numbers.
How it works
Container: for each of the six orientations of the carton, cartons = floor(589.8 ÷ a) × floor(235.2 ÷ b) × floor(239.3 ÷ c); the best orientation wins, then the count is capped at floor(28,180 ÷ gross kg per carton) when a weight is given. Load rate = cartons × carton volume ÷ 33.19 CBM. Pallet: Ti = the better of floor(PL ÷ L) × floor(PW ÷ W) and the rotated pattern; Hi = floor((stack limit − 14.4 cm deck) ÷ carton height); pallets needed = ceil(container cartons ÷ (Ti × Hi)).
Totals: units = cartons × units per carton; goods value = units × unit purchase cost. Sampling strip: ANSI/ASQ Z1.4 / ISO 2859-1 Table I — the lot-size row and inspection level give the code letter, and the letter gives the sample size (full Ac / Re plans are on the AQL Calculator).
Landed cost: duty = goods value × the duty rate you enter. MPF, formal entry = goods value × 0.3464% clamped to the FY2027 minimum $34.58 and maximum $670.86; informal entries pay the FY2027 flat fee for the mode selected ($2.77 / $8.30 / $12.45). HMF = goods value × 0.125%, ocean arrivals only. Total = goods + freight + duty + MPF + HMF + insurance + other; per-unit = total ÷ units. The MPF/HMF constants are the seller cluster’s single shared source — the same figures the MPF and landed-cost pages use.
Required price = (per-unit landed cost + other per-unit costs + fixed fee per order) ÷ (1 − percentage fee rate − target margin rate). If the fee rate plus the target margin reaches 100%, no price can reach that margin at that fee rate, and the page says so instead of printing a number.
Worked examples
The default chain — 60 × 40 × 40 cm cartons, end to end: Carton 60 × 40 × 40 cm, 12 kg, 24 units per carton at $2.50. Container: 225 cartons, 65.1% load rate, 2,700 kg — space binds. EUR pallet, 180 cm limit: Ti 4 × Hi 4 = 16 per pallet, 15 pallets for the load. Totals: 5,400 units, $13,500.00 goods value; a 5,400-unit lot at General II is code letter L, sample 200 units. Landed: freight $1,800 + duty 7.5% ($1,012.50) + MPF $46.76 + HMF $16.88 + insurance $100 = $16,476.14 total, $3.05 per unit. Pricing: at 15% fees and a 20% target margin the required price is $4.69. (These are the workbench’s default inputs, so the live page shows exactly this chain.)
Continuing on the standalone pages: Export the chain file from this page and import it on the AQL Calculator: the lot size arrives as 5,400, ready for the accept / reject table. Import the same file on the Pricing & Profit Calculator and the landed cost per unit ($3.05) is already in place for the two-direction check — what the target margin requires, and what profit a price you are testing actually leaves.
The chain at a glance — and where each step goes deeper
| Step | What it settles | The deeper page |
|---|---|---|
| 1 — Carton, container & pallet | Cartons per 20ft container, load rate, payload check, Ti × Hi and pallets for the load | 20ft Container Carton Calculator; Ti-Hi Pallet Calculator |
| 2 — Totals & sampling | Total units, goods value, AQL code letter and sample size; the packing list | AQL Calculator (accept / reject numbers) |
| 3 — Landed cost | Freight, duty, MPF and HMF itemised; total and per-unit landed cost | US Landed Cost Calculator (scenario comparison); MPF Calculator |
| 4 — Pricing | The selling price a target margin requires after price-based fees | Pricing & Profit Calculator (profit at a tested price) |
Sources: container basis — carrier 20GP specification; fees — CBP FY2027 schedule (CBP Dec. 26-14), HMF under 19 CFR 24.24; sampling — ANSI/ASQ Z1.4 / ISO 2859-1 Table I. The full data passport for this page is in the tool area above. Last verified: November 2026.
Frequently asked questions
What is the difference between this workbench and the standalone seller tools?
Depth, not numbers. The workbench runs the whole chain once, quickly, on shared figures. Each standalone page goes deeper on its own step: the AQL Calculator has the full accept / reject table and presets, the landed-cost page compares up to four scenarios side by side, the pricing page checks profit at a price you are testing as well as solving for the required price, and the container and pallet pages show every orientation and pattern. All of them compute from the same formulas and the same fee schedule.
Where do my figures go when I use this page?
Nowhere. They are held in this page’s memory while you work and are gone when you close or refresh it. They are never sent to a server, never written to browser storage (no localStorage, no IndexedDB), and never placed in the page’s URL — so a copied link, a browser history entry or a server log can never carry your prices or goods values. The only copies that persist are files you explicitly download: the chain export and the packing-list CSV.
Why does the chain travel by file instead of a link?
Because a link is a URL, and URLs leak: they sit in browser history, get pasted into chats and emails, and are written into server access logs. Prices, goods values and margins are business data, so the seller cluster’s rule is that they move only inside a file you carry yourself, or not at all. The export file is plain JSON in one shared format, so any chain tool on this site can read it — and you can open it yourself to see exactly what it holds.
Which MPF figures does the workbench use?
The same ones as every other page in the cluster, from one shared source: the CBP FY2027 schedule — formal entries 0.3464% of entered value, minimum $34.58, maximum $670.86 per entry, effective October 1, 2026 (CBP Dec. 26-14) — plus the informal flat fees ($2.77 / $8.30 / $12.45) and the Harbor Maintenance Fee at 0.125% for ocean arrivals. If CBP publishes a new fiscal-year schedule, one update changes the MPF page, the landed-cost page and this workbench together.
Is the container count a loading plan?
No. It is a single-carton-size repeating grid — all six orientations tried, the best kept, the payload checked. Real mixed loads can do better in the leftover strips, and the container door (about 234 × 228 cm) is smaller than the inside, which a tall load still has to pass through. Treat the count as a solid estimate for quoting and ordering, not as instructions for the loading crew.
Why is there no marketplace fee for my platform in step 4?
Deliberately — here and on the pricing page. Marketplace and payment fees differ by platform, category, account tier and fulfilment method, and the schedules change; a built-in table would be wrong for most sellers on the day it shipped. Enter the one combined percentage from your own current fee statement, and update it when your statement changes.
First time embedding? Read the step-by-step guide →
More free tools
Reorder Point & Safety Stock Calculator
From average daily demand, its spread, lead time and a target service level: the safety stock to hold and the stock level that should trigger the next order.
Supplier Quote Comparison
Put several suppliers’ quotes for the same item side by side — priced on the quantity you would actually have to buy, MOQ included.
Pricing & Profit Calculator
Reverse-price from your landed cost: the selling price a target margin needs after price-based fees, and the profit any price really leaves.
US Landed Cost Calculator
The full cost of an import landed in the US — goods, freight, duty at your rate, MPF, HMF and insurance, totalled and per unit.
AQL Calculator
Look up the AQL sampling plan for your lot: code letter, sample size and accept / reject numbers per ANSI/ASQ Z1.4 and ISO 2859-1.
Ti-Hi Pallet Calculator
Ti × Hi for your cartons on a standard pallet — cartons per layer, layers high, totals, units and goods value.