Verystep Guides Verystep Guides
Work Out the Full Landed Cost Before You Wire the Deposit
The supplier's price is the first line of your cost, not the last β the deposit goes out a lot easier than the surprise fees come back.

Landed cost is every dollar it takes to get a shipment from your supplier's dock to your door, added up before you commit. You build it line by line. Start with the goods value β that's your customs value, and duty plus the US entry fees key off it. Add international freight. Apply duty to the customs value only. Then the Merchandise Processing Fee: 0.3464% of customs value, with a floor and a cap you'll check in a second. Harbor Maintenance Fee, 0.125%, ocean shipments only. Insurance and the rest β broker, port, drayage β go in as other charges. Divide the total by units. That's your real cost per piece.
What you're building, and why before the deposit
Here's the pattern that burns first-time importers. The supplier quotes a unit price that leaves you a healthy margin. You wire the deposit. The shipment sails, and the other bills show up one by one β freight higher than the estimate, duty you forgot, port fees you'd never heard of. By the time the cartons reach your warehouse, your margin is half what the spreadsheet said. Nothing went wrong. You just priced the first line instead of the last one.
Landed cost fixes that by forcing every line onto the page while you can still walk away. It isn't customs advice, and it won't match your entry summary to the cent β your broker files the real numbers. It's a planning total, built early, so the go or no-go call happens before the deposit, not at the port.
The lines, in order
Work down the lines in this order. The order matters, because two of the charges are percentages of the customs value β not of the running total.
- Enter the goods value your supplier invoices you, which is the customs value the duty and fees are based on.
- Add the international freight cost for getting the shipment to the US port.
- Apply your duty rate to the customs value only, not to the freight-inclusive total.
- Work out the Merchandise Processing Fee at 0.3464% of the customs value, then clamp it to at least $34.58 and at most $670.86.
- Add the Harbor Maintenance Fee at 0.125% of the customs value, but only if the shipment arrives by ocean.
- Add insurance plus broker, port and drayage charges in the other charges line so nothing hides outside the total.
- Read the total landed cost, divide it by the number of units, and check that per-unit cost against your selling price before you wire the deposit.
The MPF clamp, in real numbers
The MPF is where small and large shipments trip people up. The rate is 0.3464% of the customs value. But CBP clamps it: no entry pays less than $34.58, and no entry pays more than $670.86, on the FY2027 schedule. So run the clamp check every time. Quick math: on a $5,000 shipment, 0.3464% is $17.32 β under the floor, so you pay $34.58. On a $300,000 shipment, the raw fee is $1,039.20 β over the cap, so you pay $670.86. In the middle, say $50,000, the fee is $173.20 and no clamp applies.

Skip the check and small orders come out understated while large ones come out overstated. Small orders are exactly where it stings, too β a fee that's $17 higher than your estimate gets spread over far fewer units, so the per-unit cost jumps the most where your margin is thinnest.
A quick run-through
Put it together on a small ocean shipment. Goods: $8,000, packed as 1,000 units. Freight to the US port: $1,200. Your duty rate is 5%, applied to the $8,000 customs value β that's $400, not 5% of $9,200. MPF: 0.3464% of $8,000 is $27.71, which is under the $34.58 minimum, so the fee is $34.58. HMF: it's ocean, so 0.125% of $8,000 adds $10. Insurance, broker and drayage together: $260.
Total landed cost: $9,904.58. Per unit: $9.90. Selling at $19.99? You've got real room, even after platform fees and ads. Target price was $12? You don't β and you just learned that for free, at your desk, before wiring a cent. That's the whole point of doing this on a Tuesday instead of at the port with the goods already on the water.
Mistakes that eat the margin
Three mistakes show up again and again. First, forgetting the MPF minimum on small orders. The percentage looks tiny, so people skip the fee or take the raw percentage β then the real entry charges $34.58 and the per-unit cost creeps up on a small run. Second, charging HMF on air freight. HMF is an ocean fee. Fly the goods in and that 0.125% line should be zero; leave it in and you've overstated your cost, maybe enough to kill a product that actually worked. Third, applying duty to the freight-inclusive total. Duty keys off the customs value β the goods β not goods plus freight. Run duty on the bigger number and you overstate the cost and misjudge the deal.
One more, quieter one: leaving broker, port and drayage fees out entirely because the supplier's quote didn't mention them. They aren't optional charges. They're just not the supplier's charges. If a line exists in real life, it belongs in your estimate.
The Verystep US Landed Cost Calculator walks the same lines in the same order: customs value, freight, duty, MPF with the minimum and maximum applied for you, HMF for ocean freight, insurance and other charges. It returns the total and the per-unit cost. Run your supplier's quote through it before the deposit leaves your account. Five minutes now beats a margin surprise at the port.
Last verified November 14, 2026 β MPF rate, minimum and maximum and the HMF rate as used in the Verystep US Landed Cost Calculator, per the FY2027 CBP fee schedule.
Frequently asked questions
Is landed cost the same as what my customs broker will charge?
No. This is a planning estimate you build before ordering, using the rates and fees you know today. Your broker files the actual entry, and the final figures can shift with classification, valuation and port charges. Use the estimate to decide whether the deal works, and the broker's paperwork for what you actually owe. None of this is customs or tax advice β for a call on classification or valuation, talk to a licensed broker.
Why does duty apply to the goods value and not the total with freight?
For most US imports, customs value is based on the price paid for the goods themselves, and international freight sits outside it. That's why the steps apply your duty rate to the customs value before freight enters the total. Freight still counts in your landed cost β you pay it β it just isn't the base for the duty percentage.
My shipment is small. Why is the MPF higher than the percentage suggests?
Because of the floor. 0.3464% of a small customs value comes out under $34.58, and CBP charges the minimum instead. On a $5,000 order you'd expect about $17 and you'll pay $34.58. Spread over few units, that gap moves your per-unit cost more than any other line β which is why the clamp check is its own step.
Do I pay HMF on every shipment?
No β ocean only. The Harbor Maintenance Fee, 0.125% of customs value, applies to cargo arriving by sea. Air freight doesn't carry it. Comparing an ocean quote against an air quote? Zeroing the HMF on the air side is one of the few honest savings in that comparison. Don't manufacture others.
What margin should I look for before I order?
There's no universal number, and anyone who hands you one doesn't know your ad costs. The check that matters is simpler: per-unit landed cost plus your selling costs β platform fees, ads, returns β must sit comfortably under your selling price, with room for a bad month. If landed cost alone eats most of the price, no sales volume rescues the deal. Walk away before the deposit, not after.
More guides

How to Use an Auto Loan Calculator to Compare Two Offers
Two dealers can quote payments that look almost identical and still be selling you loans that cost hundreds of dollars apart. The calculator shows you where the gap hides.

How to Build a Debt Payoff Order: Avalanche vs Snowball, Step by Step
Paying extra money toward debt only works if the extra money has a target. This guide builds that target: an ordered list, made two different ways, so you can see exactly where each spare dollar goes.

How to Project Compound Growth (and Read the CAGR Mode)
This calculator does two jobs in one place: it projects a balance forward at a rate you set, and it works backwards from two balances to the steady rate that links them.