🔒 100% private — runs in your browser, nothing is uploaded

Due Date Calculator

Estimate a due date from the last period (+280 days) or conception (+266 days), reverse it from a due date, and see gestational age and trimester — estimates only.

The arithmetic is the 280-day convention usually credited to Naegele’s rule: take the first day of the last menstrual period and add 280 days — 40 weeks exactly. Worked example: an LMP of 1 January 2026 gives a due date of 8 October 2026, and on 5 March 2026 the pregnancy is exactly 63 days along, which is 9 weeks 0 days, squarely in the first trimester (under 14 weeks; the second runs 14–27 weeks and the third from 28). Counting from conception instead adds 266 days, because the convention assumes conception about 14 days after the LMP: 1 January 2026 as a conception date gives 24 September 2026. The reverse calculation on this page simply subtracts the same 280 days from a due date to recover the LMP it implies. All date arithmetic is done in UTC, so the answer never shifts by a day because of your time zone or a daylight-saving change.

Estimates only — not medical advice. The numbers on this page come from population formulas, not from measuring you. They cannot diagnose anything and are not a target to chase. Talk to a healthcare professional about your own body and health.

Every date here is an estimate built on the 280-day convention. Only ultrasound dating and your clinician can date a pregnancy properly — a few days either way is normal, and only about 1 in 20 babies arrive on the estimated day itself. Your date stays in page memory on this device only; nothing is stored or sent anywhere.

⚠️ Estimates only — not medical advice. Due dates from these formulas are population conventions; only ultrasound dating and your clinician can date a pregnancy properly, and most babies do not arrive on the estimated day. Talk to a healthcare professional about your own pregnancy.

Quick answers

How do I calculate a due date from my last period?

Add 280 days (40 weeks) to the first day of the last period. An LMP of 1 January 2026 gives an estimated due date of 8 October 2026. From conception instead, add 266 days, which for 1 January 2026 gives 24 September 2026.

The 14-day gap between the two methods is the convention’s assumed time from period to ovulation. Only ultrasound dating and your clinician can date a pregnancy properly.

How far along am I, and which trimester?

Count the days from the LMP and divide by 7: 63 days is 9 weeks 0 days. Under 14 weeks is the first trimester, 14–27 the second, and 28 onwards the third — so 9 weeks is first, 20 is second, 30 is third.

This page computes gestational age for today automatically from whichever method you choose, and does all date maths in UTC so time zones never shift a result by a day.

How to use

  1. Read the banner first: every output is an estimate from a counting convention. Then choose the method — from the first day of the last period (the standard clinical default), from a known conception date, or in reverse from an existing due date.
  2. Pick the date. LMP adds 280 days (40 weeks); conception adds 266 days (38 weeks) — the 14-day difference is the average gap between a period’s first day and ovulation in the convention.
  3. Read the estimated due date together with the gestational age for today, counted in completed weeks and days, and the trimester that falls in (first under 14 weeks, second 14–27, third from 28).
  4. Treat milestones as planning aids, not appointments: your clinician’s dating — especially an early ultrasound — overrides anything a calendar formula says, and the two disagreeing by a few days is normal.

About this tool

What the convention cannot know is you. It assumes a 28-day cycle with ovulation on day 14; longer or shorter cycles move the real conception date, which is why clinicians re-date pregnancies by early ultrasound and why only about 1 in 20 babies actually arrive on the estimated day, with a spread of weeks around it considered normal. “Full term” itself is a range — early term from 37 weeks, full term 39–40, late and post-term after that — not a deadline a body has agreed to. So use this calculator for what it is good at: planning, paperwork, and understanding where in the 40-week map a date falls. For anything that changes a decision — travel, work leave timing, medical choices — the dating that counts is your clinician’s, and this page’s banner says so before it asks you for a single date.

Frequently asked questions

Why 280 days from LMP but 266 from conception?

Both count to the same endpoint. The convention dates pregnancy from the period, not from conception, and assumes conception happens about 14 days after the period starts — so the conception-based count needs 14 fewer days: 280 − 14 = 266. An LMP of 1 January 2026 gives 8 October 2026; a conception date of 1 January 2026 gives 24 September 2026.

How is gestational age counted?

In completed weeks plus leftover days, counted from the LMP. From 1 January to 5 March 2026 is 63 days, which is exactly 9 weeks 0 days. Trimesters on this page: first under 14 weeks, second from 14 to 27 weeks, third from 28 weeks — so week 9 is first, week 20 second, week 30 third.

My ultrasound date differs from this calculator. Which is right?

The ultrasound — specifically an early one — is the clinical standard, because it measures the pregnancy rather than assuming a textbook cycle. A difference of a few days is common and expected; your clinician will tell you which date they are using for your care, and that is the one that counts.

Is my date stored or sent anywhere?

No. The date arithmetic runs in this page on your device (in UTC, so time zones cannot shift a result); your date stays in page memory, is never uploaded or stored, and is gone when you close the page.

📦 Embed this tool on your site

<iframe src="https://verystep.com/embed/due-date-calculator/" title="Due Date Calculator" width="100%" height="520" loading="lazy" style="border:0"></iframe>

Free to use. The embed shows a small "Powered by Verystep" link.

First time embedding? Read the step-by-step guide →

More free tools